.png){kind=small}
Polishing
What are the optimal RPMs for working with a Dual Action machine?
It is advisable to start working at a low speed, spreading the compound on the panel, and then increase to the target RPM at gears 3-4.
How loud (in dB) is your polishing machine D09125-01?
The noise level of the D09125-01 machine is 80-82 dB at maximum speed. This is not just a specification value but has been measured in real conditions during regular machine operation.
What are the differences between the ADBL Roller D09125-01+B version and the older version D09125-01?
The new ADBL Roller D09125-02 machine features a more powerful motor compared to the older 9 mm machine. It includes a brush wear indicator, and its ergonomic design allows for a perfect fit in the hand, increasing comfort. Additionally, it offers st
Correction of one-step paint
The ADBL AIO Hard (All in One) paste is a product that, in addition to polishing, cleans and protects the paint in a single step. For manual work with ADBL AIO Soft, we recommend using a sponge ‘Finish’ pad/applicator. This can be, for example, the A
Polishing pastes
Only four small pea-sized dots are sufficient for a 40×40 cm panel. The ADBL Hard Cut, ADBL Super Polish, and ADBL Perfect Finish compounds are exclusively water-based and do not contain fillers. The All In One compounds such as ADBL AIO Hard and ADB
Pads
We recommend using a medium-cut pad. In our range, this could be the dedicated ADBL Roller Pad One Step. At present, the majority of our pads are closed-cell, with the only exception being the EVO pad. There is no straightforward answer to this quest